INSTRUCTION BOARD FOR AIR BAG SYSTEM.
The Instruction board adopts the real components of Air bag system to illustrate Air bag safety system structure and working principle. The components are rigged onto colour circuit diagram and made functional.
Real and operatable Air bag system is assembled onto a colour printed board to illustrating the structure and working process .
The Vehicle Crash is Simulated by pushing and hitting the crash sensor along the rail provided to demonstrate the quick air bag inflation.
Coloured circuit diagram on the training Module printed on to 6mm organic glass base. Where in the students can compare the diagram and actual diagram.
Detection terminals for operator to detect various sensors, actuators, electrical signals for engine control unit, such as resistive, voltage, current , frequency and wave form signals are provided on to the printed circuit diagram.
Fault setting switch bank will be provided to induce faults in the training module to demonstrate the fault and to diagnose faults.
Set the line break, grounding short circuit, improper contact or open circuit faults can be induced, user can adjust the number and type of faults.
Good working condition Parts will be provided with fuel tank. The instruction board has to be connected to 220V AC socket Which changes to 12V DC internally, so that the board works without battery.
The training module is fabricated using steel pipe frame with spray painted for good looks and the entire setup is provided with caster wheels with brakes for easy movement of the same.